The current position:Home > English > Product > Atomic ash series

YK-650 Fiber Glass Filler


Product features

YK - 690 fiber atomic ash, has high mechanical strength and good filling ability;Mainly used for repairing pits on the surface of the glass fiber reinforced plastic parts and fill the deep holes, etc.

Suitable substrate

Glass fiber reinforced plastic, steel, iron, old paint layer, etc

Ratio of the construction

Atomic ash: curing agent = 100:1-2.5 (weight ratio)
Note: the operational time of 6-10 minutes (according to the proportion of curing agent and temperature changes in different)

The construction technology

Substrate processing: use P80 - P120 for blowing ash substrate surface of sand paper burnish, go to the oil and water, dry.
Mixed aside: will the Lord grey and curing agent 100:1-2.5 mixed fully, make the color uniform.
Blade coating that will mix good atomic ash in 6-10 minutes / 25 ℃ the operational time of blade coating in the treated surface of the substrate.
40 minutes after polishing, coating / 25 ℃, can be polished.

Technical parameters

Matters needing attention

1. The surface if there are air bubbles infiltration, must be thoroughly with scraper, leveling in order to ensure good adhesion.
2. Fiber atomic ash with special curing agent, and other atomic ash mixture of curing agent.
3. Has not used up of putty and hardener should be kept sealed, atomic ash with curing agent added back into the tank.
4. Store in a cool, dry place, away from heat and fire, avoid direct sunlight.
5. Storage time: 12 months / 25 ℃.


清远雅克化工有限公司 @ All rights reserved 2015 | 粤ICP备06084242号 | The website construction:Qingyuan rubik's cube network
address:Qingyuan city, guangdong province high-tech development zone Silver light jia fu jia by 16 industrial zone tel:0763-3607328