The current position:Home > English > Product > Atomic ash series

YK-610 Lightweight Body Filler


Product features

YK - 610 super quick dry, dry grinding atomic ash, fine texture, burnish is dry;Through a one-time operation to repair tiny pit concave, minor scratches on the surface of the substrate;Suitable for medium and high-grade car fast repair.

Suitable substrate

Steel, iron, glass fiber reinforced plastic, wood and old paint layer

Ratio of the construction

Atomic ash: curing agent = 100:1.5 3 (weight ratio)
Note: the operational time for 3 to 5 minutes (according to the proportion of curing agent and temperature changes in different)

The construction technology

Substrate processing: use P80 - P120 for blowing ash substrate surface of sand paper burnish, go to the oil and water, dry.
Mixed aside: will the Lord grey and curing agent 100:1.5 3 mixed fully, make the color uniform.
Blade coating that will mix good atomic ash in 3 to 5 minutes / 25 ℃ operational time, coating on the treated surface of the substrate.
35 minutes after polishing, coating / 25 ℃, dry grinding.

Technical parameters

Matters needing attention

1. Suitable for one-off thin layer surface, the final coating thickness shall not be more than 1.0 mm.
2. The surface if there are air bubbles infiltration, must be thoroughly with scraper, leveling in order to ensure good adhesion.
3. Has not used up of putty and hardener should be kept sealed, atomic ash with curing agent added back into the tank.
4. Store in a cool, dry place, away from heat and fire, avoid direct sunlight.
5. Shelf life: 6 months / 25 ℃.


清远雅克化工有限公司 @ All rights reserved 2015 | 粤ICP备06084242号 | The website construction:Qingyuan rubik's cube network
address:Qingyuan city, guangdong province high-tech development zone Silver light jia fu jia by 16 industrial zone tel:0763-3607328