The light varnish YKSUV - 001


Features:

This series of products dedicated to the surface of the silver powder primer polishing.YKSUV - 001 type for thin coating UV LiangGuangGuang oil, high hardness, good abrasion resistance and adhesion, coating brightness, uniform appearance is exquisite, has the good performance of construction, and will not make silver bottom black, in all kinds of mobile phones, laptops, MP3 players and other high-end product has widely used in coating.

Composition:

Polyurethane acrylate monomer, light initiator, additives, etc.

Scope of application:

The radio, DVD machine, computer casings, etc.

Technical indicators:

blob.png

The construction technology:

1, the processes:

Artifacts - > surface clean and dry spray primer - silver 65 ℃ * 30 min to spray UV paint, 50 ℃ ~ 55 ℃ flow flat for three minutes to UV curing paint, inspection and packing

2, coating:

Dilution ratio: paint, thinner, = 1:1 or working fluid

Spraying viscosity: 8 seconds (Mr Iwata # 2 cups)

Curing conditions: ultraviolet light intensity of 700 ~ 800 mj/m2

Note:

1, the primer surface must level off, clean, no pollution, can use alcohol to wipe the surface oil and perspiration, reoccupy adhesive grey cloth to wipe the dust and fiber dust, etc.

2, UV varnish must use 600 purpose filter cloth before use double filtering.

3, must be in a silver paint dry completely before spray UV lacquer or affect the hardness of paint film, serious when even will produce film bit bottom, contraction, wrinkling and cracking phenomena.

4, temperature and time of can be assured.Between 50 ℃ ~ 55 ℃ to ensure the flow of time more than three minutes, otherwise it will affect the performance of the paint film.

5, avoid direct sunlight, avoid UV container openings for a long time exposed to bright light.

6, airbrush tools need to use special cleaning agent to clean.

7, avoid direct contact with the skin UV paint, protective glasses and gloves should be worn when operating, if the UV paint splashed on the skin, should be washed with soap and water immediately.

8, do not look straight into the UV lamp, in order to avoid burns.

Is the above information and my company in the experiment under special conditions, for reference only, actual operating conditions please make your own test.


清远雅克化工有限公司 @ All rights reserved 2015 | 粤ICP备06084242号 | The website construction:Qingyuan rubik's cube network
address:Qingyuan city, guangdong province high-tech development zone Silver light jia fu jia by 16 industrial zone tel:0763-3607328 email:yakoo@yakoo.com.cn

在线客服

树脂
点击这里给我发消息
原子灰
点击这里给我发消息
工业漆
点击这里给我发消息
点击这里给我发消息